12 Inch 300MM Linear Actuator Built-in Hall Effect Sensor for Synchronization Motion (Model 0041504-1)

12 Inch 300MM Linear Actuator Built-in Hall Effect Sensor for Synchronization Motion (Model 0041504-1)This is a micro industrial electric linear actuator with a built in Hall effect sensor, enabling synchronization, speed control, and position control. The actuator has a 300mm stroke, supports 12V, 24V, 36V, or 48V DC input, and a maximum thrust of 2000 N 200 kg 450 lbs. It is ideal for industries such as smart homes, industrial automation, and medical applications. It is widely used in doors, windows, cellars, trapdoors, hatchways, solar tracking

Connect the manual switch to the controller's manual switch terminals as follows:

Press and hold the button A on the transmitter: The terminal <OUTPUT1> of the receiver outputs DC power

When the joystick is moved to the end

connect terminal 4 of the UP button to the red wire

or if it shows DN 20

Extension Length: 1585 mm (center distance between two mounting holes when the linear actuator is fully extended)

this product can realize the linkage alarm function in different scenarios

5 Selectable Working Modes: Delay working mode

Release the button: The relay 2 is deactivated

This is a micro industrial electric linear actuator with a 800 mm stroke and stainless steel telescopic tube

000 cycles Plug Standard Six-pin Plug Linear Actuator Cable Length 2000±10%mm [20 in] (The length can also be customized according to your specific needs) Certifications CE Environment Temperature -26℃ to 85℃ Operating Noise about 46dB~56dB (Linear actuators with different parameters will have different noise levels

a specified retraction length of 500 mm is less than the standard retraction length of the ordered actuator (525 mm)