2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 20 Inch 500MM Stroke (Model 0041505-4)

2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 20 Inch 500MM Stroke (Model 0041505-4)This is a micro industrial linear actuator with an adjustable stroke and a standard stroke of 500 mm. It is equipped with two external normally closed magnetic switches that can slide freely, and by adjusting the position of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 500 mm, you can set it to move within a stroke range of

Release the button A: Motor 1 or linear actuator 1 stops

1) Press the UP button of the manual switch

Output: DC12V (S1PF3-DC12)

DC 24V (24V most commonly used) Stroke 14 inches / 350 mm Optional Speed (No-load) 3

When the external device outputs low level signal to terminal “Signal-” and “Signal 1+“

This is a 50mm high-performance linear actuator designed for heavy lifting operations

and connect another side of AC lamp to the neutral wire of AC power supply

And when you have purchased Hall effect sensors along with linear actuators

For small or lightweight packages

DC 12V or DC 24V (24V most commonly used) Stroke 21 mm Installation Length 75

Stroke and Length (Model 0041935) Parameter Value Stroke 150 mm Retraction Length 280 mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 430 mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

Each linear actuator would require two mounting brackets