High Lever Centre Cutter 250MM

High Lever Centre Cutter 250MMThe High Lever Centre Cutter 250mm is a 250 mm long end cutting plier designed to cut through soft and mediumhard wire, cable ties, nails, rivets and similar fastenings close to the work surface. Its centre or end cutter profile places the cutting edge at the tools nose for flush cutting where a protruding tail would be unacceptable, making it suitable for trimming studs and trimming wire ends in confined spaces. Manufactured from chromevanadium (CrV)

Key benefits of this impact socket are its Cr‑Mo alloy construction for improved impact strength and fatigue resistance

accurate holes with minimal chipping

plumbing joints

studs and bolts where the Whitworth form (55° thread angle with rounded roots and crests) is required

Industries that commonly use this die include engineering workshops

The steel backplate provides a strong support for repeated use and the EVA foam protects tool finishes and prevents noise and contact wear

The 30‑tooth configuration gives a smoother finish than coarse rip blades while still allowing reasonable feed rates

If you require alternative sizes or thread adaptors

Recommended operating pressure is typically around 2–4 bar (30–60 psi) depending on material viscosity and nozzle choice

Key benefits of this split die are its adjustability for thread fit

Typical applications and industries include joinery

rotating end cap (spring grip) allows one‑handed operation and steady torque application