Three 700MM-1000MM Stroke Heavy Duty Linear Actuator C Synchronous Control Kit (Model 0043062-2)

Three 700MM-1000MM Stroke Heavy Duty Linear Actuator C Synchronous Control Kit (Model 0043062-2)This one control three synchronous kit is used for heavy duty linear actuators to synchronize their operation. It contains three Type C heavy duty actuators with built in Hall effect sensors, one synchronous controller, one touch control handle, and a CH 3 remote control. Note: All linear actuators must be connected to the synchronous controller for the system to function properly. The synchronous controller has two selectable external control

Stroke and Length (Model 0041522-1) Parameter Value Stroke 250mm Retraction Length 355mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 605mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

Aluminum material

Press button ▼ on the left: motor 1 rotates in reversal direction

you can use the remote to achieve control

then operate it to run in the other direction

the LED screen will flash

Cable length of the touch control handle: 2000±10%MM [80 in]

Product Specifications Parameter Value Working Voltage DC 12V or DC 24V (24V most commonly used) Stroke Range 10 inches or 250 mm Optional Speed (No-load) 6±1mm/s

Operating voltage range: DC 3V ~ 36V

the resistance value between green and yellow wires will increase accordingly

Notice: Can only be connected to DC power supply

2 x Fixing Brackets G