Linear Actuator Built-in Limit Switch Signal Output Custom Option (Model 0044105)

Linear Actuator Built-in Limit Switch Signal Output Custom Option (Model 0044105)The linear actuator can be customized with built in limit switch signal output function, with four core, five core or six core wire types optional configuration. It can provide two separate feedback signals when the linear actuator moves to two end positions. Type 1: Four core Wire Linear Actuator with Built in Normally Open Limit Switch Signal Output When the linear actuator is fully retracted, signal wire 2 and the negative pole of the power supply

we will install Hall effect sensors in the linear actuators during production for you

This flat plate bracket needs to be ordered together with the linear actuator J

resulting in a retraction length of 730 mm

conveyors or other appliances and mechanicals with voltage DC12V/24V

Charge Cut-off Voltage: 25

such as model CC-12 (5000 Meter / 15000 feet range)

The maximum load capacity of the entire synchronous system is the sum of the maximum load capacities of the two linear actuators

Setting product function and 4 delay times:1) Press and hold the button K1 for 2 seconds

Press the button ▼ on the transmitter: terminal “Output” outputs DC power

suitable for 12V or 24V linear actuator Number of Connecting Linear Actuators 4 Working Frequency 2

Operating Temperature: -20°C ~ +70°CUnit Size: 100 x 68 x 50 mm (3

Size: 130 x 98 x 40 mm (5