14 In 350MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041533-4)

14 In 350MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041533-4)This is an adjustable stroke industrial linear actuator with a standard stroke of 350mm. It is equipped with two external normally closed magnetic switches that can slide freely. By adjusting the positions of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 350mm, you can set it to move within a stroke range of 60mm to 320mm. Key

small bi-directional DC motors (two control lines)

This product has a super-strong timing function that can achieve a variety of complex timing control and automatic loop control

DC 36V or DC 48V (24V most commonly used) Stroke 32 inches / 800 mm Optional Speed (No-load) 5±1mm/s

motor rotates in reversal direction or linear actuator retracts inward

This is a 400 mm industrial electric linear actuator with a built-in Hall effect sensor and a thrust of up to 6000 N

and its maximum load will be only half of the value shown in the table above

Four operating voltage versions: DC 6V

Product Specifications Parameter Value Model 0041621 Working Voltage DC 6V

plug the two terminals of the first linear actuator into the two ports of CH1 on the controller

Press and hold the button B on the transmitter: The terminals <OUT2> outputs DC power

when it and the transmitter C-2-2 form a complete set

Two speed options: 9