2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 12 Inch 300MM Stroke (Model 0041504-4)

2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 12 Inch 300MM Stroke (Model 0041504-4)This is a micro industrial linear actuator with an adjustable stroke and a standard stroke of 300 mm. It is equipped with two external normally closed magnetic switches that can slide freely, and by adjusting the position of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 300 mm, you can set it to move within a stroke range of

a specified retraction length of 1000 mm is less than the standard retraction length of the ordered actuator (1050 mm)

Stroke and Length (Model 0041936-1) Parameter Value Stroke 200 mm Retraction Length 330 mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 530 mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

or 24±2VDC (model S2PFS-DC24)

For more details

Key Features It can operate four electric linear actuators C to run completely synchronously

and signal wire 1 and signal wire 2 are connected

the working distance can reach 500M in an open ground

a specified retraction length of 142 mm is less than the standard retraction length of the ordered actuator (145 mm)

Model: S2PXW-AC-ANT3

Release button ▼ on the right: motor 2 stops

Weight: 180g

Connect to the receiver S1PF-DC: