Electric Linear Actuator C / F Head Fixed Mounting Circular Disk Bracket (Model 0043075)

Electric Linear Actuator C / F Head Fixed Mounting Circular Disk Bracket (Model 0043075)Each linear actuator would require two mounting brackets, one to fix the head of linear actuator and another to fix the bottom of linear actuator. This circular disk bracket is used to mount vertically on the head of the linear actuator C linear actuator F . Includes a circular disk bracket and a M12 M16 screw. M12 screws are used for smaller loads, and M16 screws are used for larger loads Iron material. Size: 100 x 10 mm (3. 9 x 0. 4 inches) Diameter

and this cable has three wires: UP

Model: 0010127

Stroke and Length (Model 0041944) Parameter Value Stroke 700 mm Retraction Length 880 mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 1580 mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

we will customize the front connector of the linear actuator J into the style with a threaded hole

Cable length of the touch control handle: 2000±10%MM [80 in]

This receiver is a wireless controller for DC motors or linear actuators

Wiring If you want to control a 24V DC linear actuator

4 ~ 80 inches or 10 ~ 2000 mm Optional Speed (No-load) 6±1mm/s

Cell Number: 12

If you connect the DC linear actuator to this receiver

and the connected lamp 4 is turned on

we can use a synchronous controller to operate multiple linear actuators to rise or fall synchronously