PFAFF® Lace Foot for hobbylock™ 2.0

PFAFF® Lace Foot for hobbylock™ 2.0This foot is used for sewing lace or borders together or onto any project with consistency and perfection. Compatible with the PFAFF hobbylock 2. 0 Overlock Machine. Ensure these machine settings for use: Needle Right needle Stitch type 3 thread overlock or 3 thread standard rolled hem Stitch length 1. 5 to 3 mm Differential feed lever Normal position Upper knife Working or non working position To Sew: 1. Place the fabric under guide finger (A) and

Be sure to use the appropriate needle for the thread you are using

Place the binder on the attachment plate and adjust the binder to line up

The side where the seam allowances have been pressed to

for example to achieve the width needed for a tablecloth

Use the inner right side of the presser foot to guide the fabric

Depending on what type of decorative thread you are using for your projects there are different ways of working with the Specialty Bobbin Case

Convenient storage is also available inside and out

Reduce tension slightly

Effortless threading of the needle for a faster start

With refined technology

Set decorative or satin stitch

as well as instructions for sewing projects using the designs