CR2016 Case with One Side Kapton Window (10mm) for In-situ X- Ray Analysis - 5 set/pck-CR2016-Kapton

CR2016 Case with One Side Kapton Window (10mm) for In-situ X- Ray Analysis - 5 set/pck-CR2016-KaptonEQ CR2016 Kapton are special CR 2016 coin cell cases with 10mm Kapton windows (5 set pck). The window is designed for in situ X Ray analysis of battery material phase variations during charging and discharging. 5 set of CR2016 casing per package Kapton window for X Ray beam penetration. PP (Polypropylene) sealing O ring. Compatible with MTI's MSK 110 crimper Specifications Kapton window thickness 0. 18mm Coating The positive side of the casing is

Thickness Width Length (~) Weight (~) 4

Tungsten coil heater and alumina crucible for high-temperature evaporation up to 1300 ºC

Working Temperature:    < 50°C

Optional You may order a pre-formed pouch cell case and other accessories  by click the picture below right

MTI corporation provides the high quality quartz blocks for high temperature tubing furnaces

BST8-A6V0 is an eight-channel battery and supercapacitor analyzer to analyze all kinds of batteries and supercapacitors from 0

Use anti-rust oil after the operation and store the kit inside the original box in a dry place to avoid rusting

CR2032 case and spring shown in picture is not included Specifications Material

the gas will circulate inside and force the droplets to spread outward

Max sample height: <100mm

6 +/- 4 mm) Length 1200 mm (48"") Detailed dimension drawing Max

On the Glove Box Chamber Dimension On the Air-lock Chamber