HyperBreak BMW E36/E46 Adjustable Rear Lower Arms

HyperBreak BMW E36/E46 Adjustable Rear Lower ArmsFeatures 36mm of length adjustment Can be set much shorter than most arms on the market Allows you to achieve 0 camber, even on heavily lowered cars Max length: 560mm (same length as OEM arm) Min length: 524mm High quality rod ends Easy to adjust even when installed Important information For off road use only Description Most aftermarket adjustable lower arms don't go short enough to allow 0 camber on heavily lowered E36s 46s. The HyperBreak E36 E46

The arm allows for 90mm more travel at the wheel/hub when compared to the OEM E36 arm and 30mm more than the OEM E46 arm

The HyperBreak Trailing Arm Brackets allow for much more inwards toe adjustment than the OEM brackets

This often leads to the driveshaft boots splitting which can cause the CV joint to fail prematurely

On the OEM arms the area between the spring and the hub hits the chassis of a low car

Can only be used with true rear coilovers

The slim profile and shape of the HyperBreak Drop Arms allow for a high degree of suspension travel

Can be used with or without an anti-roll bar

The arms can be used with or without a rear anti-roll bar (ARB)

This allows the user to correct the toe out that occurs when an E36 or E46 is lowered

With the HyperBreak Drop Arms the area in which the spring sits is lowered by roughly 10mm (this gives the same effect as using a spring that is 10mm shorter)

Please allow 3-5 weeks for the arms to be made

A selection of custom springs designed to be used with the HyperBreak rear drop arms or OEM E36/E46 arms